FEATURES:
BED Robust & heavily ribbed V-gap Bed is made of close grain ultra Hanrdened & Gound Bed, accurately, Machined guideway to withstand heavy cuts. Each Bed is tested for rigidity.
Headstock All gears are made of Alloy steel, Hardened & Profile Gound. Electromagnetic Break unit for stopping the main spindle.
Main Spindle Spindle made of special alloy steel with taper nose mounted on two opposed Anti-friction Tapper Roller Bearing.
Tool Post Fitted with Ratchet for Precise Positioning & quick shifting.
Apron Apron is of specially designed U-shaped inter-locking mechanism for longitudional Cross feed/Threading worm bearing & gears are lubricated through one Point Hole.
Saddle Provided with full length cross slide, Dial indicator to cut odd pitches. Accurately graduated Compound Rest is mounted on the saddle for concical turnings can be swivled on either side.
Feed Box Provides wide range of feeds & threads - inches & metric with level selector.
Tall Stock Robust design & arranged to set in for Taper Turning, Quile is of large diameter with Standard Morse Taper.
Adjustable & Graduate Rings
Safety Device Emergency brake for head stock & carriage, over load/No/Volt protection.
STANDARD ACCESSORIES:
• Electric Motor with control panel • Driving Plate 200 mm • Dead centre 2 nos. MT-3 & MT-4 • Centre holder {sleeve} • Sqaure Tool Post • Swarf Tray • Thread Dial Indicator • Quick Change Gear Box • Inches/MM Threads Change lever • Set of Spanners & Key • Oil Can • Instruction Manual

OPTIONAL ACCESSORIES:
• Electrical Magnetic Brake • Turcite 'B' Slydway • Coolant Equipment • Splash Guard • Cabinet for Tools & Tank • Dog Chuck • Tru Chuck • Fixed Steady Rest • Follow Stead Rest • Chuck Guard • Face Plate • Chuck Plate • Machine Lamp • Revolving Centre • Taper Turning Attachment • Rear Tool Post • Tool Post Grinder • Dual Colour
 
CAPACITY MODEL - 410C MODEL - 450C MODEL - 500C MODEL - 550C MODEL - 600C
Height of Centres 205 225 250 275 300
Swing over bed 410 450 500 550 600
Swing over cross slide 205 240 280 305 360
Distance between centres 750 / 1000 1 / 1.5 / 2 ( M) 1 / 1.5 / 2 ( M) 1 / 1.5 / 2 / 2.5 ( M) 1 / 1.5 / 2 / 2.5 ( M)
Movement of cross slide 240 240 300 325 350
BED          
Bed type 2V & 2 Flat 2V & 2F 2V & 2F 2V & 2 F 2V & 2F
Width of bed 275 290 315 340 375
MAIN SPINDLE          
Type of spindle nose Taper Nose Taper Nose Taper Nose Taper Nose Taper Nose
Taper bore in spindlesleeve MT - 3 MT - 3 MT - 4 MT - 4 MT - 4
Spindle Bore 42 54 54 / 63 63 / 80 63 / 80
TAIL STOCK          
Spindle Diameter 47 60 62 62 62
Taper Bore in Spindle MT - 3 MT - 4 MT - 4 MT - 4 MT - 5
Spindle Travel 150 150 150 165 165
TOOL OR TOP SLIDE          
Travel of top slide 160 170 180 180 185
Tool shank section 25 X 25 25 X 25 32 X 32 32 X 32 32 X 32
SPEEDS          
No. of speeds 9 16 16 16 16
Range (RPM) 90-1200 40-1400 40-1400 40-1400 35-1200
FEEDS          
No. of feeds 30 30 30 30 30
THREAD - RANGE          
Metric .575-4 .575-4 .575-4 .575-4 .575-4
Inch 4-28 4-28 4-28 4.28 4.28
ELECTRICAL          
Main Motor 2/1440 3/1440 3/960 3/960 5/960
Power Supply 3 Phase 3 Phase 3 Phase 3 Phase 3 Phase
OTHER DATA          
ABC (M) .75 M 1 M 1.5 M 2 M 2.5 M
Weight (Approx.) 1200 kg. 2000 kg. 2300 kg. 2800 kg. 3000 kg.
Note:- Design, specification are subject to change without notice in the interest of improvement in quality.