FEATURES:
- Precision Ground and Hardened Bed Ways.
- The Spindle is supported with Precision Roller Bearings.
- Head Stock Gears are made of High quality Steel, Ground and Hardened.
- Easy operating Speed change Levers.
- Removable Gap is provided for larger diameter work.
- D1-4 Camlock Spindle Nose.
- Foot Brake giving Rapid Braking.
- To Speeds All Geared Head Stock.
- Emergency Stop Button equipped on the Front of Head Stock.
- Extra Safety Switch Shuts down Machine Entirely for Chnaging.
| STANDARD ACCESSORIES:
Hardened bed ways, Electric Motor, R/F Switch, V-Belt, Inch/mm Gears, Dead Center, Reduction sleeve, Dial indicator, Splash guard, Spanner Instruction Manual
OPTIONAL ACCESSORIES:
Foot Braking System, Electric Coolant pump, Taper Turning Attachment, Face Plate, Steady Rest, Follow Rest, Quick change Tool Post, 3 Jaw True chuck, 4 Jaw Dog Chuck, Machine Lamo, Revolving Center, Keyway milling Attachment. |
| Model |
TM 6280 L |
| General Capacity |
| Height of centre |
400mm |
| Swing over Bed |
800mm |
| Swing over Carriage |
520mm |
| Swing over Gap |
970mm |
| Bed width |
550mm |
| Distance Between centers |
1, 1.5, 2, 3, 4, 5 (mtr) |
| Main Spindle |
| Traper of Spindle Bed |
Ø 115mm 1:20 |
| Spindle Bore |
105mm |
| Spindle Nose |
|
| No. of Spindle Speeds |
18 speed |
| Range of Speed |
6-800 RPM |
| Tailstock |
| Travel of tailstock quill |
180mm |
| Taper Holl of tailstock quill |
MT-5 |
| Threading & Feeding |
| Metric Pitch Thread |
1~240 mm (50 Kind) |
| Inch Thread |
14 ~ 1 TPI (44 Kings) |
| Range of Longitudinal Feed (mm) |
0.1 ~ 24.3 mm/r |
| Range of Longitudinal Feed (Inch) |
0.00394 ~ 0.96 in/r |
| Range of Cross Feed (mm) |
0.05 ~ 12.5 mm/r |
| Range of Cross Feed (Inch) |
0.00197" ~ 0.48" rev |
| Electricals |
| Main Motor |
11 H.P. |
| Coolant Pump Motor |
0.125 H.P. |
|